Before Using the
Machine
1
Document and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Restricting the New Address
■
This mode enables you to restrict the entering of new destinations.
When you set <RESTRICT NEW ADD.> to <ON>, the following are
restricted:
–
Specifying a destination using the numeric keys.
–
Changing registered destinations.
–
Registering new destinations.
1.
Press [Additional Functions].
2.
Press [
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].
3.
Press [
] or [
] to select <ACCESS TO DEST.>,
then press [OK].
4.
Press [
] or [
] to select <RESTRICT NEW
ADD.>, then press [OK].
Back
Previous
5.
Press [
] or [
] to select <ON> or <OFF>,
then press [OK].
6.
Press [Stop/Reset] to return to the standby
mode.
Restricting PC Faxing
■
You can specify whether or not to allow sending faxes from
computers using the fax driver.
1.
Press [Additional Functions].
2.
Press [
] or [
] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].
3.
Press [
] or [
] to select <ACCESS TO DEST.>,
then press [OK].
TOP
Next
8-18