Canon imageCLASS MF4690 Reference Manual page 321

Before Using the
Machine 1
COMMON SETTINGS
Document and Paper
2
3. TONER SAVER MODE
Copying
3
Sending and
Receiving 4
4. PRINTER DENSITY
Printing and
Scanning
5
5. DISPLAY LANGUAGE
Network
6. ADF DIRTY ERROR
6
Remote UI
7
7. INIT. COMMON SET.
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
SELECTED FUNCTION Sets to return standby display of the current mode.
Sets whether to reduce toner consumption.
– OFF
– ON
* This function is not effective for print jobs. (See "PRINTER SETTINGS," on p. 11-23.)
Recalibrates the density adjustment scale if differences between the image in the document
and the print occur. (1-9)
* This function is not effective for print jobs. (See "PRINTER SETTINGS," on p. 11-23.)
Selects the language on the display. (See Chapter 13, "Appendix," in the Basic Operation Guide.)
Sets whether the error message will appear when the ADF is dirty.
– DO NOT DISPLAY
– DISPLAY
Restores all <COMMON SETTINGS> to the default except for <DISPLAY LANGUAGE>.
Press [ ] to select <YES>.
If you do not want to restore all settings, press [
Back Previous Next
] to select <NO>.
TOP
11-8