Then Press [Ok] - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1
Scanning to a USB Memory
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Follow this procedure to scan a document to your USB memory.
- Do not connect anything other than USB memory to the USB memory
port.
- Supported file systems of USB memory are FAT16 and FAT32.
- Supported maximum sizes of a USB memory are as follows;
FAT32: 8GB
FAT16: 2GB
- USB memory with security function or card readers are not supported.
- USB memory used with an extension cable is not supported.
- Use of a USB memory through a USB hub is not supported.
- A USB memory that does not comply with USB specifications is not
supported.
- In other cases not mentioned above, images may not be saved correctly
due to the type of USB memory used.
Back Previous
Scanning to a USB Memory
■
1.
Connect a USB memory into the USB memory
port.
Insert the USB memory straight into the USB memory port. Inserting
a USB memory at an angle or inserting a USB memory that does not
comply with USB specifications may damage the USB memory port.
2.
Set documents.
3.
Press [SEND/FAX] repeatedly to select <USB
MEMORY: B&W> or <USB MEMORY: COLOR>,

then press [OK].

TOP
Next
5-4