Canon imageCLASS MF4690 Reference Manual page 68

Before Using the
Machine 1
Advanced Copy Features
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Collate Copy
■
You can copy documents collated into sets arranged in page order.
This feature can be used together with both "Two-Sided Copying"
(see p. 3-9) and "2 on 1 Combination" (see p. 3-8).
1.
Set documents.
Place the first page on the platen glass if you are not using the ADF.
2.
Press [COPY].
If <COLLATE> is set to <ON> in <STANDARD SETTINGS> in <COPY
SETTINGS>, skip steps 3.
3.
Press [Collate/2 on 1] repeatedly to select
<COLLATE>, then press [OK].
If you want to use <COLLATE> with "2 on 1 Combination" (see p. 3-8)
at the same time, select <COLLATE+2 ON 1>, then press [OK].
If you want to use with "Two-Sided Copying" at the same time, go to
step 3 on p. 3-9.
4.
Use the numeric keys to enter the desired copy
quantity (1 to 99).
Back Previous
5.
Press [Start].
When the documents are loaded in the ADF, collate copying starts
and no further operation is required.
6.
Place the next page of the document on the
platen glass, then press [Start].
Repeat this step to scan all pages.
7.
Press [OK].
The machine prints the remaining sets of copies.
– To cancel all settings, press [Stop/Reset].
– When you switch the mode by pressing the mode keys such as
[SEND/FAX], all settings will be also canceled. If you want to keep
the settings as the default, see "Setting Menu, " on p. 11-6.
– When scanning multiple page documents, <MEMORY FULL> may
appear in the LCD and scanning may be canceled. If this happens,
press [OK] to return to standby mode, and print, send, or delete
any documents stored in memory.
TOP
Next
3-7