Canon imageCLASS MF4690 Reference Manual page 365

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
7.
Press [ ] or [ ] to select <TX/RX SEPARATE>,
then press [OK].
8.
Use [ ] or [ ] to select the setting you want,
then press [OK].
<OFF>: Prints a report with the transmission and reception results
listed chronologically.
<ON>: Prints a report with the transmission and reception results
separated in a report.
9.
Press [Stop/Reset] to return to the standby
mode.
Report Items
The following items are displayed in the Activity Report:
DEPT. ID: If Department ID Management is set, the
●
Department ID is printed. Transmission logs are listed
according to Department ID.
ST. TIME: Transmission time
●
DESTINATION TEL/ID: Destination name and fax number/
●
address
NO: Transaction number
●
Back Previous
MODE: Transaction, Error correction mode
●
PGS.: Number of pages sent
●
RESULT: Result of transaction, transaction duration
●
– OK: Transaction successful
– NG: Transaction failed
TOP
Next
11-52