Canon imageCLASS MF4690 Reference Manual page 87

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
4.
Press [ ] or [ ] to select a one-touch key (01
to 08) or coded dial code (000 to 191) for which
you want to register the address, then press
[OK].
You can also select a one-touch key or coded dial code by pressing
the corresponding one-touch key, or [Coded Dial] followed by the
desired three-digit code.
5.
Press [ ] or [ ] to select <SMB>, then press
[OK].
6.
Press [ ] or [ ] to select <HOST NAME>,
then press [OK].
7.
Use the numeric keys to enter the name of the
file server on the network (up to 120 characters),
then press [OK].
Ex.
H O S T N A M E
c a n o n 0 1
8.
Press [ ] or [ ] to select <NAME>, then press
[OK].
9.
Use the numeric keys to enter the destination's
name (up to 16 characters), then press [OK].
: 1
Back Previous
10.
Press [ ] or [ ] to select <FILE PATH>, then
press [OK].
11.
Use the numeric keys to specify the folder to
which the job is to be sent (up to 120characters),
then press [OK].
12.
Press [ ] or [ ] to select <LOGIN NAME>,
then press [OK].
13.
Use the numeric keys to enter the login name,
then press [OK].
You can enter up to 24 characters for the login name.
14.
Press [ ] or [ ] to select <PASSWORD>, then
press [OK].
15.
Use the numeric keys to enter the password,
then press [OK].
You can enter up to 14 characters.
To register another one-touch key or coded dial code, repeat the
procedure from step 4.
16.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
4-13