Canon imageCLASS MF4690 Reference Manual page 274

Before Using the
Machine 1
LOAD PAPER
Document and Paper
Description
2
Copying
Action
3
Sending and Description
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
Action
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
No paper is loaded in the paper cassette or multi-
purpose tray when copying or printing.
Load paper correctly. Then press [OK] when
using the paper cassette.
No paper is loaded in the paper cassette or
multi-purpose tray when printing a received
document.
Or, when printing a report or list, this massage
appears if the paper size is not appropriate for
printing a report or list even if paper is loaded.
This error message appears with one of the
messages below.
<CHANGE REG'D SIZE→PAPER SETTINGS>
<CANNOT PRINT RX DATA/FIX ERROR TO PRINT>
Load paper correctly. Then press [OK] when
using the paper cassette.
For report or list, set the paper size to <LTR>,
<LGL>, <A4>, <OFICIO>, <BRAZIL- OFICIO>,
<MEXICO-OFICIO>, <FOLIO> or <FLSP>, and
then load paper of the same size.
Back
MEMORY FULL
Description The machine is full of jobs.
Action Print, send, or delete any documents stored in
memory.
Action Divide the document stack or data into a few
parts and try again one by one.
Action Send the document with low resolution.
Action When this message appears during using the
ADF, the scanning document stops halfway. In
this case, clear the paper jam from the ADF.
Description The number of TX/RX jobs that can be stored in
memory reached the maximum.
Action The maximum numbers of jobs that can be
stored in memory are as follows (Based on the
condition that the other party sends the fax by
the imageCLASS MF4690 with ITU-T No.1 Chart
standard mode); Up to 70 jobs for sending or 90
jobs for receiving, 95 fax jobs including sending
and receiving, or 75 e-mail and I-fax jobs for
receiving. Wait for the machine to send any
documents in memory. Also print, send, or delete
any documents stored in memory.
TOP
Previous Next
10-17