Canon imageCLASS MF4690 Reference Manual page 69

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
2 on 1 Combination
■
2 on 1 combination automatically reduces two documents to fit on
the selected paper size. This feature can be used together with both
"Collate Copy" (see p. 3-7) and "Two-Sided Copying" (see p. 3-9).
1.
Set documents.
Place the first page on the platen glass if you are not using the ADF.
2.
Press [COPY].
3.
Press [Collate/2 on 1] repeatedly to select <2 ON
1>, then press [OK].
If you want to use <2 ON 1> with "Collate Copy" (see p. 3-7) at the
same time, select <COLLATE+2 ON 1>, then press [OK].
If you want to use with "Two-Sided Copying" at the same time, go to
step 3 on p. 3-9.
Back Previous
4.
Use the numeric keys to enter the desired copy
quantity (1 to 99).
5.
Press [Start].
When you set the document on the platen glass, press [Start] for
each document. When scanning is complete, press [OK].
– If you press [OK] without scanning the second document, only
the first document will be printed on the left side of the paper.
– A maximum of 1/8" (4 mm) margin will be produced between the
two reduced documents in 2 on 1 combination copying.
– To cancel all settings, press [Stop/Reset].
– When you switch the mode by pressing the mode keys such as
[SEND/FAX], all settings will be also canceled. If you want to keep
the settings as the default, see "Setting Menu, " on p. 11-6.
TOP
Next
3-8