Canon imageCLASS MF4690 Reference Manual page 276

Before Using the
Machine 1
PHONE OFF HOOK
Document and Paper
HANG UP PHONE
2
Description
Copying
Action
3
PLATEN GLASS DIRTY
Sending and CLEAN PLATEN GLASS
Receiving 4
Description
Printing and
Scanning
5
Action
PREPARING SCANNER...
Network
PLEASE WAIT
6
Description
Remote UI
Action
7
SAME FILE NAME
System Manager
Settings Description
8
Maintenance
Action
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
The external telephone is off the hook.
Hang up the external telephone.
The ADF scanning area on the left side of the
platen glass may be dirty.
Clean the ADF scanning area, then press [OK].
The machine is not ready for scanning.
Wait until the machine is ready.
The same file name exists when you are scanning
a document to a USB memory.
Press [OK] and rename the file.
Back
START AGAIN
Description A transmission error has occurred because the
line condition was poor.
Action Check the line condition, then try again.
STOP KEY PRESSED
PRESS OK KEY
Description [Stop/Reset] has been pressed while scanning
the document using the ADF.
Action Press [OK], then set the document again.
SYSTEM ERROR
Description Some kind of error has occurred in the machine.
Action Turn off the main power switch, wait for more
than 10 seconds, then turn it on again. If the
message persists, turn off the main power switch,
disconnect the power cord, and contact Canon
Customer Care Center.
TONER COVER OPEN
CLOSE COVER
Description A cover is open.
Action Check the cover, and make sure that it is
completely closed.
TOP
Previous Next
10-19