Canon imageCLASS MF4690 Reference Manual page 79

Before Using the
Machine 1
Basic Sending Method
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Follow this procedure to send faxes and e-mails, or to send
documents to a file server.
For network connection, see "Set the Machine for Network
Usage," in the Starter Guide.
1.
Set documents.
Place the first page on the platen glass if you are not using the ADF.
If you want to send multipage documents as E-mail (Color), scan the
documents by the ADF. You can only send one page by the platen
glass.
2.
Press [SEND/FAX] repeatedly to select the
sending method, then press [OK].
If you want to send document to a file server, you can specify the
file server addresses only with one-touch keys, coded dial codes, or
[Address Book] key. (See "Specifying Destinations, " on p. 4-20.) You
cannot specify a file server addresses with the numeric keys. Skip to
step 4.
Back Previous
3.
Specify the fax number or e-mail address with
the numeric keys.
You can also specify the fax number or e-mail addresses with one-
touch keys, coded dial codes, or [Address Book] key. (See "Specifying
Destinations, " on p. 4-20.)
4.
Press [Start].
When you set the documents on the platen glass, press [
to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start dialing.
TOP
Next
] or [ ]
4-5