Remote Ui - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1

Remote UI

Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
You can set whether to enable the Remote UI to operate the
machine and change settings.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].
3.
Press [ ] or [ ] to select <REMOTE UI>, then
press [OK].
4.
Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: You can specify settings and operate the machine through
the Remote UI.
<OFF>: You cannot specify settings and operate the machine
through the Remote UI.
Back Previous
5.
Press [Stop/Reset] to return to the standby
mode.
The Remote UI is enabled only after you restart the machine.
(the main power switch is turned off, and then back on.)
TOP
Next
8-16