Canon imageCLASS MF4690 Reference Manual page 92

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Changing Group Name
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
4.
Press [ ] or [ ] to select a group to edit, then
press [OK].
To select a group stored under the coded dial code, press [Coded
Dial], then enter the three-digit code using the numeric keys.
5.
Press [ ] or [ ] to select <NAME>, then press
[OK].
6.
Press [ ] repeatedly to go back to a wrong
character, then press [Clear].
To delete the entire name, press and hold [Clear].
7.
Enter a new character with the numeric keys,
then press [OK].
Back Previous
8.
Press [Stop/Reset] to return to the standby
mode.
Deleting Group Addresses
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
4.
Press [ ] or [ ] to select a group to delete,
then press [OK].
To select a group stored under the coded dial code, press [Coded
Dial], then enter the three-digit code using the numeric keys.
5.
Press [ ] or [ ] to select <SELECT ADD/TEL
NO>, then press [OK].
TOP
Next
4-18