Canon imageCLASS MF4690 Reference Manual page 279

Before Using the
Machine 1
#0001
Document and Paper
Description
2
Action
Copying
#0003
3
Description
Sending and
Receiving 4
Action
Printing and
Scanning
5
Description
Network
6
Action
Description
Remote UI
7
Action
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
A document may be jammed.
Remove the jammed document.
An attempt was made to send a document of 24
7/8" (630 mm) or longer from the ADF.
Divide the document into smaller parts and send
from the platen glass.
A document takes a long time to send because it
contains too much data.
Reduce the scanning resolution before sending.
A document takes a long time to receive.
Contact the other party and ask them to reduce
their scanning resolution or divide the document
into smaller parts for sending.
Back
#0005
Description The other fax machine did not respond within 35
seconds.
Action Send the document again. Contact the other
party and have them check their fax machine. If
you are making an overseas call, add a pause to
the number.
Description The other party may not be using a G3 fax
machine.
Action Check with the other party and send the
document to a G3 fax machine. If the other party
does not have a G3 fax machine, try sending your
document using a transmission mode the other
party's fax machine supports.
#0009
Description The paper has run out or the paper cassette is
not set properly.
Action Load the paper or reset the paper cassette
properly.
TOP
Previous Next
10-22