Press [ ] Or; Maintenance 9 - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].
3.
Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <DEDICATED
PORT>, then press [OK].
5.
Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: If you want to set or browse detailed information on the
machine with a Canon printer driver or utility.
<OFF>: If you are not using a Canon printer driver or utility.
6.
Press [Stop/Reset] to return to the standby
mode.
7.
Restart the machine.
Back Previous Next
TOP
6-10