VTI Instruments Metek EX1202 User Manual page 74

High-density switch/measure and control systems
Hide thumbs Also See for Metek EX1202:
Table of Contents

Advertisement

VTI Instruments Corp.
Sample Trigger Options
Sample Trigger Source: sets the trigger line that moves the DMM from the Wait-For-
Sample Trigger Slope: indicates whether a rising or falling edge will move the DMM from
Count: sets the number of samples to that will be taken per trigger event.
Delay: indicates the delay that will occur between getting a Sample Trigger to taking a
Interval: when set to Interval, an internal time periodically sends a sample trigger. This
Trigger Output Options (a trigger can be generated either when the measurement completes,
or when the read value is out of tolerance)
Measurement Complete Trigger: sets the trigger line that will be pulsed when the
Over Limit Trigger: sets the trigger line to pulse when an over-limit condition occurs.
High Limit: sets the high input level for the over-limit condition.
Low Limit: sets the low input level for the over-limit condition.
74
Sample state to the Take Measurement state.
the Wait-For-Sample state to the Take Measurement state.
measurement.
parameter sets the time between sample triggers.
Measurement Complete state is reached.
Basic EX1200 DMM Operation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Metek EX1202 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents