VTI Instruments Metek EX1202 User Manual page 60

VTI Instruments Corp.
8) Click the Submit button. Once this is done, it is no longer possible to communication with the
EX1200 mainframe. This is normal and is addressed in the following steps.
9) Set a static IP address for the NIC card by doing the following:
a) Navigate to Start → Settings → Network Connections.
b) Right click on the NIC card that the EX1200 mainframe is connected to and select
c) Select Internet Protocol (TCP/IP) and click Properties.
d) Click the Use the following IP address radio button.
60
F 2-19: C
IGURE OMPLETED
Properties.
F
IGURE
EX1200 M S
AINFRAME TATIC
2-20: TCI/IP S
ELECTION
EX1200 Series Preparation for Use
IP C
ONFIGURATION