Figure 4.42 L2 Switching > Spanning Tree > Stp Port Settings - Advantech EKI-7706 Series User Manual

Item
Force Version
Apply
The ensuing table for STP Information lists the following settings (informational
only):
STP, BPDU Forward, PathCost Method and Force Version
4.5.10.2 STP Port Settings
The STP Port Settings page allows you to configure the ports for the setting, port's
contribution, configure edge port, and set the status of the BPDU filter.
To access this page, click L2 Switching > Spanning Tree > STP Port Settings.
Figure 4.42 L2 Switching > Spanning Tree > STP Port Settings
The following table describes the items in the previous figure.
Item
Port Select
Admin Enable
Path Cost (0 = Auto) Set the port's cost contribution. For a root port, the root path cost for
Edge Port
P2P MAC
Migrate
Apply
Description
Click the drop-down menu to select the operating mode for STP.

STP-Compatible: 802.1D STP operation.

RSTP-Operation: 802.1w operation.

MSTP-Operation: 802.1s operation.
Click Apply to save the values and update the screen.
Description
Select the port list to specify the ports that apply to this setting.
Select Enabled or Disabled to setup the admin profile for the STP
port.
the bridge. (0 means Auto).
Click the drop-down menu to set the edge port configuration.

No: Force to false state (as link to a bridge).

Yes: Force to true state (as link to a host).
Click the drop-down menu to set the Point-to-Point port configuration.

No: Force to false state.

Yes: Force to true state.
Click the check box to enable the migrate function.
Forces the port to use the new MST/RST BPDUs, requiring the switch
to test on the LAN segment. for the presence of legacy devices, which
are not able to understand the new BPDU formats.
Click Apply to save the values and update the screen.
64 EKI-7706 Series User Manual