2.3.2
Wall-Mounting
The wall mounting option provides better shock and vibration resistance than the DIN
rail vertical mount.
Note!
When installing, make sure to allow for enough space to properly install
the cabling.
Before the device can be mounted on a wall, you will need to remove the DIN rail
plate.
1.
Rotate the device to the rear side and locate the DIN mounting plate.
2.
Remove the screws securing the DIN mounting plate to the rear panel of the
switch.
3.
Remove the DIN mounting plate. Store the DIN mounting plate and provided
screws for later use.
EKI-7706 Series User Manual
Figure 2.4 Removing DIN Mount Plate
11