X-Ring Elite; Figure 4.48 L2 Switching > X-Ring Elite > X-Ring Elite Settings - Advantech EKI-7706 Series User Manual

The ensuing table for MST Instance Priority Information lists the following settings
(informational only):
MSTI ID, Priority and Action
4.5.10.8 MST Instance Info
To access this page, click L2 Switching > Spanning Tree > MST Instance Info.
The ensuing table for STP Bridge Status lists the following settings (informational
only):
Bridge Identifier, Designated Root Bridge, Root Path Cost, Designated Bridge,
Root Port and TCNLast Topology Change
The ensuing table for STP Port Status lists the following settings (informational
only):
Port, Identifier (Priority / Port Id), Path Cost Conf/Oper, Designated Root Bridge,
Root Path Cost, Designated Bridge, Edge Port Conf/Oper, P2P MAC Conf/
Oper, Port Role and Port State
4.5.10.9 STP Statistics
To access this page, click L2 Switching > Spanning Tree > STP Statistics.
The ensuing table for STP Statistics lists the following settings (informational only):
Port, Configuration BPDUs Received, TCN BPDUs Received, Configuration
BPDUs Transmitted and TCN BPDUs Transmitted
4.5.11

X-Ring Elite

The X-Ring Elite function provides an improvement over Spanning Tree and Rapid
Spanning Tree and a rapid auto recovery in the event that the network suffers a
corrupt or broken link and prevents network loops.
4.5.11.1 X-Ring Elite Settings
The X-Ring Elite Settings allows you to enable or disable the state of the X-Ring
settings.
To access this page, click L2 Switching > X-Ring Elite > X-Ring Elite Settings.
Figure 4.48 L2 Switching > X-Ring Elite > X-Ring Elite Settings
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for Information lists the following settings (informational only):
X-Ring Elite State
Description
Select Enabled or Disabled to setup the X-Ring Elite mode.
Click Apply to save the values and update the screen.
68 EKI-7706 Series User Manual