Cfm; Figure 4.58 L2 Switching > Cfm > Cfm Settings; Figure 4.59 L2 Switching > Cfm > Me Groups - Advantech EKI-7706 Series User Manual

The following table describes the items in the previous figure.
Item
Port Select
Enabled
Apply
The ensuing table for Loopback Detection Port Information lists the following
settings (informational only):
Port, Enable State and Loop Status
4.5.14

CFM

4.5.14.1 CFM Settings
To access this page, click L2 Switching > CFM > CFM Settings.
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for Information lists the following settings (informational only):
CFM State
4.5.14.2 ME Groups
To access this page, click L2 Switching > CFM > ME Groups.
The following table describes the items in the previous figure.
Item
Group Name
Level
Apply
The ensuing table for Information lists the following settings (informational only):
Group, Level and Delete (Click Delete to delete the desired ME group)
EKI-7706 Series User Manual
Description
Enter the port to define the local loopback detection setting.
Select Enabled or Disabled to setup the Loopback Detection
function.
Click Apply to save the values and update the screen.
Figure 4.58 L2 Switching > CFM > CFM Settings
Description
Click Enabled or Disabled to enable CFM settings.
Click Apply to save the values and update the screen.
Figure 4.59 L2 Switching > CFM > ME Groups
Description
Enter the name for ME group.
Click the drop down menu to select the ME group level.
Click Apply to save the values and update the screen.
73