11 Routine Maintenance - ELECTRO FREEZE FREEDOM 360 Series Operator's Manual

ELECTRO FREEZE Soft Serve Model 99T-RMT

11 Routine Maintenance

Electro Freeze recommends the following schedule to help maintain your Model 99T-RMT
Soft Serve Twist Freezer in like-new operating condition. Take the time to learn and perform
these routine procedures and receive in return many years of valuable service from your
freezer. Protect your investment!
1. Disassemble, wash, rinse,
sanitize, and air-dry all parts that come
into contact with the mix or product.
2. Clean the cylinder, cylinder inlet
tubes and drain tube with the appropriate
brushes.
3. When cleaning, inspect all O-
rings, seals and hoses. Replace any O-
ring, seal or hose that is worn, torn, or
loose fitting.
4. Wipe all exterior surfaces of the
freezer to remove any splattered mix.
5. Check overrun and temperature
of the product.
36
DAILY
CAUTION
To prevent bacteria growth,
remove all O-rings when
cleaning. Failure to do so
could create a health hazard.
WEEKLY
1. Carefully inspect all parts for
wear, including seals, O-rings, mix
transfer tubes, and blades.
2. Replace as required.
Replace blades if worn 3/16" or more.
3. Check the shaft tang and
drive coupling for wear.
4. A worn coupling will
have a nonparallel shape on the
drive opening.
184621