Routine Maintenance - ELECTRO FREEZE SLX400C Operator's Manual

13

Routine Maintenance

Electro Freeze recommends the following schedule to help maintain your freezer
in like-new operating condition. Take the time to learn and perform these routine
procedures and receive in return many years of valuable service from your freezer.
Protect your investment!
1. Disassemble, wash, rinse, sanitize,
air dry, reassemble and sanitize all
parts which come into contact with
the mix.
2. Clean the cylinder and drain tube with
the appropriate brushes.
3. Upon cleaning, inspect and lubricate
all seals and O-rings as instructed
that come into contact with mix.
Replace any O-ring that is worn, torn,
or loose-fitting.
4. Wipe all exterior surfaces of the
freezer to remove any splattered mix.
5. Check overrun and temperature of
the product.
184582-01
ELECTRO FREEZE Soft Serve Models SLX400C
DAILY
CAUTION
To prevent bacteria growth,
remove all O-rings when
cleaning. Failure to do so
could create a health hazard.
WEEKLY
1. Carefully inspect all parts for wear,
including seals, o-rings, and blades.
Replace as required.
Replace blades if worn 3/16 (5mm) or
more.
2. Check the beater tangs and drive
shaft for wear.
A worn coupling will have a nonparallel
shape on the drive opening.
35