Safety Decal Locations - ELECTRO FREEZE FREEDOM 360 Series Operator's Manual

ELECTRO FREEZE Soft Serve Model 99T-RMT

Safety Decal Locations

Do not attempt to operate the freezer
until all safety precautions and operating
instructions in this manual are read and
understood.
Take notice of all warning, caution,
instruction and information decals (or
labels) on the freezer as shown in the
figure to the right. The labels have been
put there to help maint ain a safe working
environment.
The labels have been designed to
withstand washing and cleaning. All
labels must remain legible for the life of
the freezer. Check labels periodically to
be sure they can be recognized as
warning labels.
If it is necessary to replace any label,
please contact your local authorized
Electro Freeze Distributor or H. C. Duke
& Son, Inc. When ready to order , you
will need to determine the (1) p art
number, (2) type of label, (3) location of
label, and (4) quantity required, and
include a return shipping address.
No. Part No.
1
HC165025
2
HC165126
3
HC165246
4
HC165048
You may contact your local authorized
Electro Freeze Distributor, as follows:
Name:
Address:
Phone:
or — for factory service assist ance —
contact H. C. Duke & Son, Inc., Electro
Freeze Service Dep artment by phone,
fax or e-mail:
Phone: (309) 755-4553
FAX:
E-mail: Service@hcduke.com
(The decals on the next page are num-
bered 1, 2, 3, and 4. Those numbers
correspond to the numbers in the t able
below. The table provides the p art
number, description, and quantity for
each decal.)
Description (Qty)
Decal — Beater Warning (1)
Decal — Panel Removal W arning (3)
Decal — Pressurized System Warning (1)
Decal — Warning Rotating Parts (2)
iv
(800) 755-4545
(309) 755-9858
184621