ELECTRO FREEZE FREEDOM 360 Series Operator's Manual page 48

ELECTRO FREEZE Soft Serve Model 99T-RMT
11 Routine Maintenance
1500 HOURS OF
OPERATION OR
1. Contact your Electro Freeze
distributor for the initial oil change of the
gear reducer.
SEMI-ANNUALLY
1. Have the condenser fan motor
checked by your Electro Freeze Distribu-
tor. Add oil as needed.
5000 HOURS OF
OPERATION OR
1. Contact your Electro Freeze distribu-
tor to h ave the oil in the gear reducer
changed.
NOTE: Under normal conditions the oil
should be changed after 5000 hours of
operation or every year, whichever occurs
first.
40
6 MONTHS
1 YEAR
(continued)
ANNUALLY
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the "OFF" position and that
the main power source is
disconnected. Some freezers
have more than one
disconnect switch.
1. Call your Electro Freeze Distributor
for service to replace drive belts and
lubricate fan motor as needed.
2. Call your Electro Freeze Distributor
to clean the inside of the freezer including
base, side panels, condenser, etc.
3. Call your Electro Freeze Distributor
to check water-cooled condensers and
flush clean to remove scale and deposits if
necessary.
184621