ELECTRO FREEZE FREEDOM 360 Series Operator's Manual page 45

11 Routine Maintenance
1. Clean the Mix Transfer System:
If the transfer hose is assembled im-
properly or replacement has been
neglected, it may be necessary to clean
mix from the MTS due to hose failure.
If this happens frequently the MTS
should be removed for complete clean-
ing.
Figure 11-1
184621
AS NEEDED
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the "OFF" position and that
the main power supply is
disconnected. Some freezers
have more than one
disconnect switch.
Important:
ELECTRO FREEZE Soft Serve Model 99T-RMT
(continued)
swing clamp and open shoe to gain
access to the hose cavity.
assembly.
base below the MTS.
supplied, flush the hose cavity and
roller assembly.
clean in between rollers. Flush with
sanitizer.
clean dry cloth.
shoe. See figure 11-1.
CAUTION
Make sure the freezer is
depressurized before
proceeding.
a. Remove cover, loosen
b. Remove mix transfer hose
c. Lay a towel on the cabinet
d. Using the spray bottle
e. Use a brush (supplied) to
f. Wipe all surfaces with a
g. Remove and clean roller
37