Cleaning Accessories - ELECTRO FREEZE FREEDOM 360 Series Operator's Manual

6.1

Cleaning Accessories

The following accessories shipped with the freezer are necessary for cleaning,
sanitizing, and disassembly/assembly:
1 BRUSH - Cylinder, 4 inch diameter
2 BRUSH - 9/16 inch diameter with an
3 BRUSH - 7/16 inch diameter with an
4 BRUSH - 1 inch diameter with an
HC158018 BRUSH -7/16" DIA x 12" OAL
3
4
HC158026 BRUSH -1" DIA x 12" LG.
5 HC158037 BRUSH -1/4" DIA x 18-1/2" LG.
Figure 6-1
See Replacement Parts section of manual, Accessories, for additional part numbers.
184621
with 36 inch handle: used to clean the
cylinder.
overall length of 30 inches: used to
clean the drain tube, the mix feed
tube in the ceiling of the cabinet, and
the pickup tube.
overall length of 12 inches: used to
clean the transfer hose, the braided
hose and the air bleed opening in the
dispense head.
overall length of 12 inches: used to
clean the plunger opening in the
dispense head. Also use to clean the
disassembled shaft seal and the head
bushing.
2
HC158019 BRUSH -9/16" DIA x 30" OAL
HC169374 TOOL -O RING
6
REMOVAL
ELECTRO FREEZE Soft Serve Model 99T-RMT
5 BRUSH - 1/4 inch diameter with an
overall length of 18-1/2 inches: used
to clean the air meter hose, the small
hole in the back of the dispense head
and small parts.
6 TOOL - O-RING REMOVAL: aids in
removing o-rings from the spigot,
head, air bleed plug, and shaft seal.
7 LUBRICANT - Petrol Gel: approved
lubricant for moving parts and o-rings.
8 KIT - O-RING: contains all o-rings
and seals needing replacement on a
regular basis. (not shown)
1
HC158009 BRUSH - 4" DIA x 36"
& HC158012 HANDLE
HC158000A
7
LUBRICANT-
8
HC196103 BOTTLE-
PETROL GEL
WASH 500ml
17