Day-Night Switch; Mix Transfer System (Mts) Switch; Cabinet Switch; Timer - ELECTRO FREEZE FREEDOM 360 Series Operator's Manual

5 Operator Controls and Indicators
5.2

DAY-NIGHT Switch

This two-position switch controls the day
and night refrigeration modes.
thermostat controls the system refrigera-
tion to maintain the product serving
temperature between 18 to 21°F (-8 to -
6°C). This is the normal operating posi-
tion.
5.3

Mix Transfer System (MTS) Switch

This two-position switch controls the
operation of the MTS located in the
refrigerated mix storage cabinet.
is the normal operating mode. This
position is for priming the cylinder,
cleaning, and day operation.
5.4

Cabinet Switch

This two-position switch controls the
cabinet refrigeration.
NOTE: Cabinet door must be closed
for cabinet refrigeration to operate.
mostat controls the system refrigeration
to maintain a mix temperature of 36 to
41°F (2 to 5°C) in the storage cabinet.
Use this position when mix is in the
storage cabinet but not in the cylinder.
5.5

Timer

184621
a. "DAY" (left) — The temperature
a. "MIX ON" (left) — This position
4
a. "ON" (left) — The cabinet ther-
5
This control will bypass the thermostat,
forcing the compressor and beater motor
to run up to 3 minutes. Use the timer for
for quick start-ups or fast recovery when
dispensing large portions.
ELECTRO FREEZE Soft Serve Model 99T-RMT
2
b. "NIGHT" (right) — The medium-
temperature thermostat controls the
system refrigeration to maintain a mix
holding temperature of 40°F (4ºC) or
below.
b. "OFF" (right) — In this position
the MTS will not operate. Use this
position for night operation.
b."OFF" (right) — In this position
the cabinet will not be refrigerated.
NOTE: The cabinet is automatically
"ON" when either SELECTOR switch
is in the"AUTO" position.
Excessive use of the timer causes
freeze-up and damage to the freezer.
(continued)
3
Important:
13