Routine Maintenance - ELECTRO FREEZE Compact Series Operator's Manual

ELECTRO FREEZE Shake Model CS705
12

Routine Maintenance

Electro Freeze recommends the following sched-
ule to help maintain your equipment in like-new
operating condition. Take the time to learn and
perform these routine procedures and receive in
return many years of valuable service from your
freezer. Protect your investment.
1.
sanitize, air dry, reassemble and sanitize
all parts that come into contact with the
mix or product.
2.
with sanitizing solution.
3.
with the appropriate brushes.
3.
lubricate all seals and O-rings as in-
structed that come into contact with mix.
Replace any O-ring that is worn, torn, or
loose-fitting.
4.
freezer to remove any splattered mix.
5.
of the product.
184592
DAILY
Disassemble, wash, rinse,
CAUTION
To prevent bacteria growth,
remove all O-rings when clean-
ing. Failure to do so could create
a health hazard.
Clean and sanitize syrup lines
Clean the cylinder and drain tube
Upon cleaning, inspect and
Wipe all exterior surfaces of the
Check overrun and temperature
WEEKLY
1. Carefully inspect all parts for
wear including, seals, O-rings, mix
transfer tube and blades.
2. Replace as required.
Replace blades if worn 3/16" or
more.
3. Check the beater tangs and
drive shaft for wear.
GOOD SHAFT
TANG
A worn coupling will have a nonparallel
shape on the drive opening.
4. Check the air filter and clean as
necessary. After cleaning apply spray
adhesive, p/n HC162548.
35