Closing Procedures; Night Switch Operation - ELECTRO FREEZE FREEDOM 360 Series Operator's Manual

9

Closing Procedures

9.1

Night Switch Operation

will allow, the freezer may be switched
to night operation which will allow the
freezer to cycle all night and maintain
approximately 38°F (3°C) or lower
product in the cylinders and cabinet.
night mode, leave the SELECTOR
switches on "AUTO" (1, Figure 9-1)
and the cabinet switch "ON" (4).
"OFF" (3) position.
to "NIGHT" (2) and let the machine
cycle.
Figure 9-1
184621
ELECTRO FREEZE Soft Serve Model 99T-RMT
1. In areas where health codes
2. To switch the freezer to the
3. Turn the MTS switches to the
4. Turn the DAY/NIGHT switches
5. Remove serrated nozzles and
clean the drip tray assembly and all soiled
surfaces with soap and water. Use
sanitizing solution in spray bottle and
brush to clean the bottom of the plunger
openings.
6. To start the machine after using
the NIGHT mode, turn the DAY/NIGHT
switches to "DAY" (2) and the MTS
switches to "ON" (3). Before replacing
sanitized nozzles use a small brush and
sanitizer to clean the bottom of the
plunger openings.
31