ELECTRO FREEZE FREEDOM 360 Series Operator's Manual page 15

4 Part Names and Functions
The following descriptions apply to figure 4-1. The number preceding the
part name corresponds to the number in the figure.
1
2
3
4
5
6
7
184621
ELECTRO FREEZE Soft Serve Model 99T-RMT
HEAD
Encloses the freezing cylinder and
provides an opening for product to
be dispensed.
O-RING - PLUNGER
Seals the plunger in the head. Must
be lubricated to seal and slide
properly.
O-RING - HEAD
Seals the head to the freezing
cylinder. Must be lubricated.
PLUNGER - SIDE
Seals the product opening in the
dispense head when closed. Allows
product to flow when open.
O-RING - PLUG
Seals the air bleed plug in the
dispense head.
PLUG - AIR BLEED
Seals the air bleed opening in the
dispense head when closed. Allows
excess air to be removed from the
cylinder in the filling process.
PUSH ROD - PLUNGER
Starts the freezer when dispensing.
Must be in place before freezer will
operate.
(continued)
8 PLUNGER - CENTER
Seals the product opening in the
dispense head when closed.
Allows product to flow when
open.
9 PIN - HANDLE
Secures the handle to the dis-
pense head.
10 HANDLE - DISPENSE
Opens and closes the plunger to
start and stop the flow of product
from the freezer.
11 KNOB - HAND
Secures the dispense head to the
freezing cylinder.
12 HANDLE - DISPENSE
Opens and closes the plunger to
start and stop the flow of product
from the freezer.
13 NOZZLE - SERRATED
Forms the frozen product as it is
dispensed.
(SIDE)
(CENTER)
7