To Set Mdns; To Set Hdmi - Rigol MS05000-4CH User Manual

Chapter 19 System Utility Function Setting
System-related
Beeper
When the beeper is enabled, you can hear the sound of the beeper when you
perform the following operations:
Press a key or a menu key on the front panel

Enable the touch screen

When a prompt message is displayed

Press Utility and then press Beeper continuously to select "ON" (
By default, it is OFF.
Language
This oscilloscope supports menus in multiple languages. Both Chinese and English
are available for the display of the help information, prompt messages, and interface.
Press Utility  Language and rotate the multi-function knob
desired language; then, press down the knob
also press Language continuously to select the language or enable the touch screen
to tap the desired language and select it.
System Information
Press Utility  System  About to view the system information of the
oscilloscope, including the manufacturer, product model, serial number, etc.
Besides, you can also press About to view the system information of the oscilloscope
in the "Help" system menu.
Power On
You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off.
Press Utility  System, and then press Power On continuously to select "Last" or
"Default". By default, it is "Last".
Last: returns to the setting of the system at last power-off.

Default: returns to the factory setting of the system.

MSO5000 User's Guide
nd Quality Products Online at:
GlobalTestSupply
www.
) or "OFF" (
to select the
to select the language. You can
.com
sales@GlobalTestSupply.co
RIGOL
).
19-7