Noise Rejection - Rigol MS05000-4CH User Manual

Chapter 5 To Trigger the Oscilloscope

Noise Rejection

Noise rejection can reject the high frequency noise in the signal and reduce the
possibility of miss-trigger of the oscilloscope.
In the trigger control area (Trigger) on the front panel, press Menu to enter the
trigger setting menu, then press Noise Reject continuously (for some triggers,
Noise Reject is a sub menu under More, at this time, press Menu  More 
Noise Reject) to enable or disable noise rejection.
Note:
Trigger Type
MSO5000 series oscilloscope provides the following trigger types.
Edge Trigger

Pulse Trigger

Slope Trigger

Video Trigger

Pattern Trigger

Duration Trigger

Timeout Trigger

Window Trigger

Delay Trigger

Setup/Hold Trigger

Nth Edge Trigger

RS232 Trigger (Option)

I2C Trigger (Option)

SPI Trigger (Option)

CAN Trigger (Option)

FlexRay Trigger (Option)

LIN Trigger (Option)

I2S Trigger (Option)

MIL-STD-1553 Trigger (Option)

MSO5000 User's Guide
nd Quality Products Online at:
This function is only available when the trigger source is an analog channel.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.co
RIGOL
5-7