Rigol MS05000-4CH User Manual page 302

Digital oscilloscope
Table of Contents

Advertisement

RIGOL
Storage System
Press Storage on the front panel to enter the store and load setting interface. It
provides one USB HOST interfaces on the front panel and one USB HOST interface on
the rear panel, which can all be connected to the USB storage device for external
storage. The USB storage devices connected are marked as "Removable USB
Disk(D)", "Removable USB Disk(E)", "Removable USB Disk(F)", and "Removable USB
Disk(G)", respectively.
Storage Type
The file types for storage include image, waveform, and setups. The storage
descriptions of each type are as follows.
1. Image
Press Save Image  Format, and then use the multifunction knob
select the image type. You can also press Format continuously or enable the
touch screen to select it. Save the screen image to the internal or external
memory in "*.png", "*.bmp", "*.jpg", or "*.tif" format.
After selecting this type:
Press File Name to input the file name to be saved. For filename input,
refer to descriptions in "To Create a Folder". Press More  Auto Name
to select "ON", then the filename is generated automatically. If the filename
that you input is the same as the existing filename, a prompt message will
be displayed, reminding you that the existing file will be overwritten and
asking you whether to continue or not.
Press Invert to enable or disable the invert function.
Press Color to select the desired storage color. It can be set to "Gray" or
"Color".
Press Window to display or hide the disk management interface.
Press Save to save the set image file. Press More  Header to select
"ON" or "OFF". If you select "ON", the instrument model, firmware version
number, serial number, and the image creation date will be displayed in the
header of the image when you save the image file.
Tip
After a USB storage device (FAT32 format, flash memory) is connected, press
Quick on the front panel to save the file. You can select to save to the internal
memory or the external USB storage device. By default, it is saved to the internal
memory.
18-2
nd Quality Products Online at:
GlobalTestSupply
www.
Chapter 18 Store and Load
to
MSO5000 User's Guide
.com
sales@GlobalTestSupply.co

Advertisement

Table of Contents
loading

Table of Contents