Table of Contents
Advertisement
RIGOL
1. Connect the output terminal of the logic probe to the digital channel input
terminal on the front panel of the oscilloscope in the correct direction, as shown
in Figure 1-6.
2. Connect the other terminal of the logic probe to the signal terminal under test.
RIGOL's MSO5000 series supplies PLA2216 active logic probe option. To apply
to different application scenarios, PLA2216 provides two connection methods to
connect the signal under test. For details, refer to
User's Guide
Note:The digital channel input terminal does not support hot plugging. Please do
not insert or pull out the logic probe when the instrument is in power-on state.
1-6
nd Quality Products Online at:
.
Figure 1-6 To Connect the Logic Probe
GlobalTestSupply
www.
Chapter 1 Quick Start
PLA2216 Active Logic Probe
MSO5000 User's Guide
.com
sales@GlobalTestSupply.co
Advertisement
Table of Contents
