Rigol MS05000-4CH User Manual page 341

Chapter 19 System Utility Function Setting
The press SINGLE to switch to the next touch screen test interface, as shown
in the figure below. At this time, you can pinch or stretch the RIGOL logo on
the screen to zoom it out or in to check whether the gestures work normally.
Press RUN/STOP for three consecutive times to exit the touch screen test
interface.
System Time
The system time is displayed at the lower-right side of the screen in "hh:mm
(hour:minute)" format. When you save the waveform, the output file will contain the
time information.
Press Utility  More  Time to open the time setting menu.
1. Set the System Time
(1) Press Show Time to open or close the system time interface.
(2) Set "year": Press Year, rotate the multifunction knob
(3) Set "month": Press Month, rotate the multifunction knob
MSO5000 User's Guide
nd Quality Products Online at:
or use the pop-up numeric keypad to input the numeric value to set it.
set it or use the pop-up numeric keypad to input the numeric value to set it.
GlobalTestSupply
www.
directly to set it
directly to
.com
sales@GlobalTestSupply.co
RIGOL
19-17