ICP DAS USA CAN-8823 User Manual page 59

If everything is ok, click the "Finish" button to create the EDS file.
Note: If users use off-line method to get the EDS file, the objects , used to
record the input/output range of the analog modules, will be described to
default value in the EDS file. However, the I-87K slot modules will keep the
input/output range parameter settings in their own EEPROM. As a matter of
fact, it may cause the mismatch between real input/output range setting and
EDS file. By the way, CAN-8123/CAN-8223 needs to configure the input/output
range settings by using CANopen SDO protocol. For more detail, please refer
to the section 5.5.
CAN-8x23 user's manual (Revision 3.20, Mar/08/2012) ------ 59