ICP DAS USA CAN-8823 User Manual page 57

Step 6: Users can perform the parameter setting in the "General Setting"
windows. As well, users can check the default settings on each slot module by
moving the cursor on the slot module in order to get the module name and
module information in the "Module Information" area.
Step 7: The two fields, "description" and "create by", can help users to do some
notes in EDS files. If these two fields are empty, the "ICPDAS CANopen I/O
Slave Device" and "ICPDAS" will be used as the default value when creating
the EDS file.
CAN-8x23 user's manual (Revision 3.20, Mar/08/2012) ------ 57