Table of Contents
Advertisement
Step 4: After finishing the configuration, users can one-left click on the slot
module in the "CAN Slave Device Situation" area. If the configuration is
successful, users can see the correct module name , for example 8024 on the
top of the slot module.
Step 5: Then, repeat the step 3~4 to configure the slot 1 to I-8042 module.
Then, click "Save Setting" button to finish the off-line parameter settings.
CAN-8x23 user's manual (Revision 3.20, Mar/08/2012) ------
56
Advertisement
Table of Contents
