Chassis Intrusion Connector; Figure 3-7: Chassis Intrusion Connector Location; Table 3-9: Chassis Intrusion Connector Pinouts - IEI Technology gKINO-R1000 User Manual

3.2.6 Chassis Intrusion Connector

CN Label: CHASSIS1
CN Type: 2-pin header, p=2.54 mm
CN Location: See Figure 3-7
CN Pinouts: See Table 3-9
The chassis intrusion connector is for a chassis intrusion detection sensor or switch that
detects if a chassis component is removed or replaced.

Figure 3-7: Chassis Intrusion Connector Location

Pin Description
1 CHASSIS OPEN#
2 GND

Table 3-9: Chassis Intrusion Connector Pinouts

Page 24
gKINO-V/R1000 SBC