Table of Contents
Advertisement
JD780A Series Analyzers
Indirect connection
Procedure
1.
Connect the Spectrum Analyzer RF In port of the JD780A series and the monitor (test) port of
BTS.
Figure 202 Indirect connection
JD785A/JD786A
CAUTION
The maximum power for the Spectrum Analyzer RF In port is +25 dBm (0.316 W). If the
input signal level to be measured is greater than +25 dBm, use a High Power
Attenuator to prevent damage when you directly connect the signal to the instrument or
connect the signal from the coupling port of a directional coupler.
Over the air (OTA)
Procedure
1.
Connect an Omni/directional RF antenna to the Spectrum Analyzer RF In port of the JD780A
series.
2.
Connect a GPS antenna to the GPS port of the JD780A series.
Figure 203 OTA connection
JD785A/JD786A
414
Using TD-SCDMA Signal Analyzer
JD788A
JD788A
Advertisement
Table of Contents
