Connecting A Cable; Direct Connection; Indirect Connection - JDS Uniphase CellAdvisor JD780A Series User Manual

Figure 175 EV-DO signal analyzer measurement screen

Connecting a cable

Direct connection

Procedure
1.
Connect the Spectrum Analyzer RF In port of the JD780A series and the Power amplifier output
port of BTS.
Figure 176 Direct connection
JD785A/JD786A

Indirect connection

Procedure
1.
Connect the Spectrum Analyzer RF In port of the JD780A series and the monitor (test) port of
BTS.
Using EV-DO Signal Analyzer
JD780A Series Analyzers
JD788A
371