Table of Contents
Advertisement
JD780A Series Analyzers
4.
Press the Very Good soft key to set its threshold.
5.
Enter a value, and then press the Enter soft key. You can also use the rotary knob.
6.
Press the Good soft key to set its threshold.
7.
Enter a value, and then press the Enter soft key. You can also use the rotary knob.
8.
Press the Fair soft key to set its threshold.
9.
Enter a value, and then press the Enter soft key. You can also use the rotary knob.
10.
Press the Poor soft key to set its threshold.
11.
Enter a value, and then press the Enter soft key. You can also use the rotary knob.
12.
Optional. Go to SAVE/LOAD > Save, and then select Limit to save the limit settings.
See "Using save" on page 31 for more information.
Measurement example
Figure 224 Route map measurement with TD-SCDMA OTA signal analyzer
1) Map view
450
Using TD-SCDMA Signal Analyzer
Advertisement
Table of Contents
