Figure 10
Spectrum measurement with spectrum analyzer
Setting trace
You can display up to six traces on the measurement chart simultaneously.
Procedure
1.
Press the TRACE/DISPLAY hard key.
2.
Press the Select Trace soft key, and then select the trace number: T1, T2, T3, T4, T5, or T6.
The legend shape of the selected trace changes from square to round to indicate that the trace is
the active one now.
3.
Do one of the following:
To
Clear current data and display with new
measurements
Select
Clear Write
Using Spectrum Analyzer
JD780A Series Analyzers
Trace Legend
W
67