Table of Contents
Advertisement
JD780A Series Analyzers
b.
Enter a value by using the numeric keys to set manually.
c.
Press the Enter soft key.
3.
To set the incremental step for the PN offset, complete the following steps:
a.
Press the PN Increment soft key.
b.
Enter a value by using the numeric keys.
c.
Press the Enter soft key.
4.
To set the threshold between Auto and Manual, complete the following steps:
a.
Press the Threshold soft key. Its default setting is -27 dB.
b.
Enter a value between -50 and zero by using the numeric keys to change the value in the
Manual mode.
c.
Press the Enter soft key.
5.
Toggle the Q-Paging soft key between On and Off to enable or disable the quick page channel
that indicates the power of Quick Page Walsh code 80.
6.
To set the maximum amplifier power, complete the following steps:
a.
Press the Max Amplifier Power soft key.
b.
Enter a value by using the numeric keys.
c.
Press the dBm soft key.
7.
To set the pilot power, complete the following steps:
a.
Press the Pilot Power soft key.
b.
Enter a value by using the numeric keys.
c.
Press the dBm soft key.
8.
To set the threshold for pilot dominance, complete the following steps:
a.
Press the More (1/2) > Pilot Dominance > soft key.
b.
Enter a value by using the numeric keys.
c.
Press the Enter soft key.
NOTE
Recommended value is 10. Color of the Pilot Dominance indicator on the screen bases
on this setting.
9.
To set the threshold for multipath power, complete the following steps:
a.
Press the More (1/2) > Multipath Power < soft key.
b.
Enter a value by using the numeric keys.
c.
Press the Enter soft key.
NOTE
Recommended value is one. Color of the multipath power indicator on the screen bases
on this setting.
10.
Optional. Go to SAVE/LOAD > Save, and then select the save option from the choices available
for your measurement mode. See "Using save" on page 31 for more information.
364
Using CDMA Signal Analyzer
Advertisement
Table of Contents
