Table of Contents
Advertisement
Procedure
1.
Press the SYSTEM hot key.
2.
Select More (1/2) > Administration, and then enter your password.
3.
Toggle the Edit Limit soft key and select Disable to lock the LIMIT hot key or Enable to unlock
the key.
NOTE
Disabling the Edit Limit limits the access to the LIMIT hot key only. The Limit features
including displaying limit line(s) and Pass/Fail result function properly as predefined.
Modifying online help
The online help can be modified if needed.
Procedure
1.
Press the SYSTEM hot key.
2.
Select More (1/2) > Administration, and then enter your password.
3.
Toggle the Modify Help soft key and select Enable to allow modifying the online help or Disable
to restrict any modification.
Running IP test
You can test an Internet Protocol (IP) configuration of the cell site's backhaul.
Procedure
1.
Press the SYSTEM hot key.
2.
Select More (1/2) > Utility > IP Test.
3.
Select the command option, from the following choices:
–
To display the route and measure transit delays of packets, toggle the Commands soft key
and select Traceroute.
–
To display the reachability and measure the round-trip time, toggle the Commands soft key
and select Ping.
4.
To set the destination IP address to be tested, complete the following steps:
a.
Press the Destination IP soft key.
b.
Press the First Octal soft key.
c.
Enter a value, and then press the Enter soft key.
d.
Press the Second Octal soft key and repeat step c.
e.
Press the Third Octal soft key and repeat step c.
f.
Press the Fourth Octal soft key and repeat step c.
5.
Press the Execute soft key and select Start to start testing.
Test result is displayed on the screen as the test is progressing.
6.
Press the Execute soft key and select Stop to stop testing.
Optional. Press the Save soft key to save the test result as a .txt file type.
7.
Getting Started
JD780A Series Analyzers
43
Advertisement
Table of Contents
