Table of Contents
Advertisement
JD780A Series Analyzers
Figure 158 Channel power measurement with CDMA signal analyzer
NOTE
You can use the LIMIT hot key to analyze your measurements with the user-definable
limit and Pass/Fail indication. See "Setting limit for RF tests" on page 347 for more
information.
Occupied bandwidth
The Occupied Bandwidth measures the spectrum shape of the carrier. It is defined as the bandwidth,
which includes 99% of the transmitted power among total transmitted power.
After configuring test parameters as described in the "Configuring test parameters" on page 334, your
measurement result is displayed on the screen as like the following example, Figure 159.
Figure 159 Occupied bandwidth measurement with CDMA signal analyzer
342
Using CDMA Signal Analyzer
Advertisement
Table of Contents
