Table of Contents
Advertisement
JD780A Series Analyzers
Figure 181 Channel power measurement with EV-DO signal analyzer
NOTE
You can use the LIMIT hot key to analyze your measurements with the user-definable
limit and Pass/Fail indication. See "Setting limit for RF tests" on page 385 for more
information.
Occupied bandwidth
The Occupied Bandwidth measures the spectrum shape of the carrier. It is defined as the bandwidth,
which includes 99% of the transmitted power among total transmitted power.
After configuring test parameters as described in the "Configuring test parameters" on page 373, your
measurement result is displayed on the screen as like the following example, Figure 182.
Figure 182 Occupied bandwidth measurement with EV-DO signal analyzer
380
Using EV-DO Signal Analyzer
Advertisement
Table of Contents
