Edit Permission Group; Black And White List; Device Management; Network Configuration - Vitek VT-TNR818P Manual

Transcendent NVR Series
10.3.2

Edit Permission Group

Go to "Edit Permission Group" interface and then click
permission group (the operations of the "Edit Permission Group" are similar to that of the "Add
Permission Group", please see 10.3.1 Add Permission Group for details). Click
the group as another group. Click
permission groups ("Administrator", "Advanced" and "Ordinary") cannot be deleted.

10.4 Black and White List

Click StartàSettingsàAccount and AuthorityàSecurity to go to the following interface.
Check "Enable" and then choose "Enable Allow List" or "Enable Block List" (the PC
client of which the IP address is in the allow list can access NVR remotely while the PC client
in the block list cannot).
Add IP/IP segment/MAC. Click "Add IP" or "Add MAC" button and then check "Enable"
in the popup window (only if you check it can the IP/IP segment/MAC you add be effective).
Enter the IP/IP segment/MAC and then click "OK" button. In the above interface, click
to edit IP/IP segment/MAC, click

11.1 Network Configuration

11.1.1

TCP/IPv4 Configuration

IP Address Settings
Ø
Click StartàSettingsàNetworkàTCP/IPv4 to go to the following interface. Check "Obtain an
IP address automatically" and "Obtain DNS automatically" to get the IP address and DNS
automatically, or manually input IP address, subnet mask, gateway, preferred DNS and
alternate DNS. Click "Apply" to save the settings.

11 Device Management

to delete the permission group. The three default
to delete it. Click "Apply" to save the settings.
73
in the group list to edit the
to save