Click
to pop up the window as shown below. Set the group name and dwell time (the
dwell time of the camera group sequence view) in the window. Check the cameras and then
click "Add" to add group. Click
4.2.2
Edit Camera Group
Click
to modify the group information such as group name and dwell time. Click
to delete the group.
5 Live Preview Introduction
5.1 Preview Interface Introduction
You should add cameras first after logging on to the system (see 4.1.1 Add Camera for details).
Refer to the interface as shown below, drag one camera in the preview window to another
window for camera window exchanging.
to view the cameras in the group after adding group.
30
Transcendent NVR Series