Enable or disable "Snap", "Alarm-out", "Preset", "Buzzer", "Pop-up Video", "Pop-up
Message Box" and "E-mail". The IPC Offline Settings are similar to that of the sensor alarm
(see 9.1 Sensor Alarm for details).
Click "Apply" to save the settings.
9.4 Alarm Event Notification
9.4.1
Alarm-out
Click StartàSettingsàAlarmàEvent Notification to go to the following interface.
Set the delay time and the schedule of each alarm-out. You can click "Edit Schedules" to
edit the schedules (see 7.3.1 Add Schedule for details).
Click "Apply" to save the settings. You can click "Test" to test the alarm output.
9.4.2
E-mail
Click StartàSettingsàAlarmàEvent NotificationàE-mail to go to the e-mail configuration
interface. Set the e-mail address of the recipients. See 11.1.4 E-mail Configuration for details.
9.4.3
Display
Click StartàSettingsàAlarmàEvent NotificationàDisplay to go to the display configuration
interface. Set the duration time of the pop-up video and the pop-up message box. Click "Apply"
Transcendent NVR Series
66